home
end customers
case studies
contact

Frontplate

On a previous process there have been problems with the outside contour not cleaning up.
Since this is cosmetic there was either the option to give more material on the
casting (quite a hoop to jump through), or change the locating features.
The later was achieved by now having two location points on the long side
and one location point (comprised of the"swimming points") on
the short side. Total cost under $2000.- and the casting stays untouched.
Plenty of trouble was spared for a lot of folks who never even where bothered.


Langhorst Consulting
204 N.Shenandoah Dr. #101.
Latrobe, PA 15650
Tel: 724-757-2476
heinz@langhorstconsulting.com